Eusso 85Mbps Powerline HomePlug Ethernet Adapter Manual de usuario Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 11
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
a. Plug the Ethernet cable that came in the box into a LAN port on your router or switch in
your network.
b. Plug the Powerline HomePlug Ethernet Adapter into an electrical outlet near the router.
c. Plug the other end of Ethernet cable that came in the box into the 85Mbps Powerline
HomePlug Ethernet Adapter. Check the status lights:
Power: The power LED turns solid green. If it does not, see Chapter 2,
“Troubleshooting”.
Power Link: The Power Link LED blinks to indicate that the device is connected
to the power line, and that no other Powerline HomePlug Ethernet Adapter
devices have been detected at this stage.
Ethernet Link: The Ethernet LED blinks to indicate activity. If not, make sure
that the Ethernet cable on the Powerline HomePlug Ethernet Adapter that you
connected in the previous step is securely attached to the Powerline HomePlug
Ethernet Adapter and the router, that the router is connected to the modem, and
the router and modem are powered on.
d. Make sure that the Internet port of your router is connected to your modem, and that your
computer is either connected to a LAN port on the router or to a port on the Powerline
HomePlug Ethernet Adapter.
Connect other Ethernet Powerline HomePlug Ethernet
Adapters
1. Before plugging in your other Powerline HomePlug Ethernet Adapter devices, take a note of
the device password printed on the label on the back of each device. You will need this
password later if you want to change the Powerline HomePlug Ethernet Adapter network
password. If you are adding more than one other Powerline HomePlug Ethernet Adapter, also
note the MAC address given on the label, so that you will know which device the password is
for.
2. Plug your other Powerline HomePlug Ethernet Adapter devices into power outlets in your
home near to the other computers and peripherals to be included in your Powerline HomePlug
Ethernet Adapter local area network.
3. Use an Ethernet cable to connect an Ethernet port on each of the computers and peripherals to
the nearest Powerline HomePlug Ethernet Adapter device.
Vista de pagina 3
1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios