Add a Device to an Existing Powerline HomePlug Ethernet
Adapter Network
To add a device to a Powerline HomePlug Ethernet Adapter network with the default
network password, all you need to do is plug the new device into a power outlet.
If the network password has been set, then you will need to run the Powerline HomePlug
Ethernet Adapter encryption utility to set the new device to the network password. How you
do this depends on whether the computer running the Powerline HomePlug Ethernet
Adapter encryption utility is connected directly to the new Powerline HomePlug Ethernet
Adapter device (local) or is connected to a different device in the Powerline HomePlug
Ethernet Adapter network (remote).
Adding a New Device from a Locally Connected Computer
15. Plug the new Powerline HomePlug Ethernet Adapter device into an available AC power outlet
and connect it to an Ethernet port on the computer.
16. Start the Powerline HomePlug Ethernet Adapter encryption utility and select the Security tab.
17. Type the network password in the Private Network Password text box and click Set Local
Device Only.
18. Select the Main tab and check that the other devices in the Powerline HomePlug Ethernet
Adapter network appear in the device list. It may take a minute or two for all devices in the
network to be detected.
Adding a New Device from a Remotely Connected Computer
19. Note the device password given on the label on the back of the new Powerline HomePlug
Ethernet Adapter device.
20. Plug the new Powerline HomePlug Ethernet Adapter device into an AC power outlet.
21. Start the Powerline HomePlug Ethernet Adapter encryption utility on the remote computer
and select the Security tab.
22. Click Use Default (Public Network). The password in the Private Network Password text box
changes to the default password, Powerline Homeplug Ethernet.
23. Click Set All Devices.
24. Select the Main tab and wait for the new Powerline HomePlug Ethernet Adapter device to be
listed.
25. Select the new Powerline HomePlug Ethernet Adapter device from the device list, and click
Enter Password.
26. In the pop-up window, enter the password from the back label of the device and click OK.
27. Select the Security tab.
28. Re-enter the network password in the Private Network Password text box, and then click Set
All Devices.
(16 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales