Eusso UGL2430-UHM Manual de usuario descargar pdf (Pagina 20)

Configure IP Address Manually

c) Select “Use the following IP address” and “Use the following DNS server

addresses”.

IP address: Fill in IP address 192.168.1.x (x is a number between 2 to 254).

Subnet mask: Default value is 255.255.255.0.

Default gateway: Default value is 192.168.1.1.

Preferred DNS server: Fill in preferred DNS server IP address.

Alternate DNS server: Fill in alternate DNS server IP address.

‧ If you decide to use IP address from Wireless Router, select “Obtain an IP

address automatically”.

‧ If you decide to use the IP address you are desired, select “Use the

following IP address”. Make sure enter correct addresses in “IP Address”

and “Subnet Mask” fields.

‧ You must set Wireless Router’s IP address as “Default Gateway”.

‧ If the DNS Server fields are empty, select “Use the following DNS server

addresses” and enter the DNS address is provided by your ISP, then click

“OK”.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Sin comentarios

Eusso UGL2430-UHM Manual de usuario Pagina 20