Eusso 2 & 4 Port VoIP Gateway Manual de usuario descargar pdf (Pagina 56)

1.2.5.5 Flash & Call waiting

/VoIP Setup/Advance Setup/Flash & Call waiting

On this page, user can define the parameters relative to the FLASH key and Call

Waiting function. These functions usually work with PBX

z Token for flash key on VoIP(!):

Define the token for flash key during VoIP protocol ( use “! “ by default).

z Flash Signal generate length :

Define the pause time (ms) for one “,” symbol at /Routing Setting/VoIP

Call Out/. This pause till is useful for PBX seize the trunk line from

extension line. The default time is 1000ms, Input range from 100 to

3000ms.

z Flash Signal Detect Threshold:

Define the threshold for valid FLASH signal. Only the flash time length

between setting between min. to max. is accept by the gateway.

z Call waiting from PSTN when VoIP talking:

Enable/Disable the Call Waiting function from PSTN line when talking by

VoIP.

z Call waiting from VoIP when PSTN talking:

Enable/Disable the Call Waiting function from VoIP when talking by PSTN

line.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 100 101

Sin comentarios

Eusso 2 & 4 Port VoIP Gateway Manual de usuario Pagina 56